Home > MCI_linux-32 #544223 > replicasets_0 > auth_no_pri.js

MongoDB shell version: 2.8.0-rc5-pre-

/data/db/

ReplSetTest Starting Set

ReplSetTest n is : 0

ReplSetTest n: 0 ports: [ 31000, 31001, 31002 ]	31000 number

{

	"useHostName" : true,

	"oplogSize" : 40,

	"keyFile" : "jstests/libs/key1",

	"port" : 31000,

	"noprealloc" : "",

	"smallfiles" : "",

	"rest" : "",

	"replSet" : "testReplSet",

	"dbpath" : "$set-$node",

	"restart" : undefined,

	"pathOpts" : {

		"node" : 0,

		"set" : "testReplSet"

	}

}

ReplSetTest Starting....

Resetting db path '/data/db/testReplSet-0'

2015-01-09T18:59:34.635+0000 I -        shell: started program (sh4905):  /data/mci/shell/src/mongod --oplogSize 40 --keyFile jstests/libs/key1 --port 31000 --noprealloc --smallfiles --rest --replSet testReplSet --dbpath /data/db/testReplSet-0 --nopreallocj --setParameter enableTestCommands=1

 m31000| 2015-01-09T18:59:34.586+0000 I CONTROL  ** WARNING: --rest is specified without --httpinterface,

 m31000| 2015-01-09T18:59:34.586+0000 I CONTROL  **          enabling http interface

 m31000| note: noprealloc may hurt performance in many applications

 m31000| 2015-01-09T18:59:34.588+0000 I CONTROL  

 m31000| 2015-01-09T18:59:34.588+0000 W CONTROL  32-bit servers don't have journaling enabled by default. Please use --journal if you want durability.

 m31000| 2015-01-09T18:59:34.588+0000 I CONTROL  

 m31000| 2015-01-09T18:59:34.618+0000 I CONTROL  [initandlisten] MongoDB starting : pid=4905 port=31000 dbpath=/data/db/testReplSet-0 32-bit host=ip-10-28-60-12

 m31000| 2015-01-09T18:59:34.618+0000 I CONTROL  [initandlisten] ** WARNING: You are running this process as the root user, which is not recommended.

 m31000| 2015-01-09T18:59:34.618+0000 I CONTROL  [initandlisten] 

 m31000| 2015-01-09T18:59:34.618+0000 I CONTROL  [initandlisten] 

 m31000| 2015-01-09T18:59:34.618+0000 I CONTROL  [initandlisten] ** NOTE: This is a 32 bit MongoDB binary.

 m31000| 2015-01-09T18:59:34.618+0000 I CONTROL  [initandlisten] **       32 bit builds are limited to less than 2GB of data (or less with --journal).

 m31000| 2015-01-09T18:59:34.618+0000 I CONTROL  [initandlisten] **       Note that journaling defaults to off for 32 bit and is currently off.

 m31000| 2015-01-09T18:59:34.618+0000 I CONTROL  [initandlisten] **       See http://dochub.mongodb.org/core/32bit

 m31000| 2015-01-09T18:59:34.619+0000 I CONTROL  [initandlisten] 

 m31000| 2015-01-09T18:59:34.619+0000 I CONTROL  [initandlisten] db version v2.8.0-rc5-pre-

 m31000| 2015-01-09T18:59:34.619+0000 I CONTROL  [initandlisten] git version: aee446a97d7c3d7b6129348de6957d8e178864b2

 m31000| 2015-01-09T18:59:34.619+0000 I CONTROL  [initandlisten] build info: Linux build16.nj1.10gen.cc 2.6.32-431.3.1.el6.x86_64 #1 SMP Fri Jan 3 21:39:27 UTC 2014 x86_64 BOOST_LIB_VERSION=1_49

 m31000| 2015-01-09T18:59:34.619+0000 I CONTROL  [initandlisten] allocator: tcmalloc

 m31000| 2015-01-09T18:59:34.619+0000 I CONTROL  [initandlisten] options: { net: { http: { RESTInterfaceEnabled: true, enabled: true }, port: 31000 }, nopreallocj: true, replication: { oplogSizeMB: 40, replSet: "testReplSet" }, security: { keyFile: "jstests/libs/key1" }, setParameter: { enableTestCommands: "1" }, storage: { dbPath: "/data/db/testReplSet-0", mmapv1: { preallocDataFiles: false, smallFiles: true } } }

2015-01-09T18:59:34.672+0000 W NETWORK  Failed to connect to 127.0.0.1:31000, reason: errno:111 Connection refused

 m31000| 2015-01-09T18:59:34.690+0000 I NETWORK  [websvr] admin web console waiting for connections on port 32000

 m31000| 2015-01-09T18:59:34.691+0000 I INDEX    [initandlisten] allocating new ns file /data/db/testReplSet-0/local.ns, filling with zeroes...

2015-01-09T18:59:34.877+0000 W NETWORK  Failed to connect to 127.0.0.1:31000, reason: errno:111 Connection refused

 m31000| 2015-01-09T18:59:34.980+0000 I STORAGE  [FileAllocator] allocating new datafile /data/db/testReplSet-0/local.0, filling with zeroes...

 m31000| 2015-01-09T18:59:34.981+0000 I STORAGE  [FileAllocator] creating directory /data/db/testReplSet-0/_tmp

 m31000| 2015-01-09T18:59:35.023+0000 I STORAGE  [FileAllocator] done allocating datafile /data/db/testReplSet-0/local.0, size: 16MB,  took 0.04 secs

 m31000| 2015-01-09T18:59:35.032+0000 I REPL     [initandlisten] Did not find local replica set configuration document at startup;  NoMatchingDocument Did not find replica set configuration document in local.system.replset

 m31000| 2015-01-09T18:59:35.034+0000 I NETWORK  [initandlisten] waiting for connections on port 31000

[ connection to ip-10-28-60-12:31000 ]

ReplSetTest n is : 1

ReplSetTest n: 1 ports: [ 31000, 31001, 31002 ]	31001 number

{

	"useHostName" : true,

	"oplogSize" : 40,

	"keyFile" : "jstests/libs/key1",

	"port" : 31001,

	"noprealloc" : "",

	"smallfiles" : "",

	"rest" : "",

	"replSet" : "testReplSet",

	"dbpath" : "$set-$node",

	"restart" : undefined,

	"pathOpts" : {

		"node" : 1,

		"set" : "testReplSet"

	}

}

ReplSetTest Starting....

Resetting db path '/data/db/testReplSet-1'

 m31000| 2015-01-09T18:59:35.103+0000 I NETWORK  [initandlisten] connection accepted from 127.0.0.1:40943 #1 (1 connection now open)

2015-01-09T18:59:35.201+0000 I -        shell: started program (sh4924):  /data/mci/shell/src/mongod --oplogSize 40 --keyFile jstests/libs/key1 --port 31001 --noprealloc --smallfiles --rest --replSet testReplSet --dbpath /data/db/testReplSet-1 --nopreallocj --setParameter enableTestCommands=1

 m31001| 2015-01-09T18:59:35.123+0000 I CONTROL  ** WARNING: --rest is specified without --httpinterface,

 m31001| 2015-01-09T18:59:35.123+0000 I CONTROL  **          enabling http interface

 m31001| note: noprealloc may hurt performance in many applications

 m31001| 2015-01-09T18:59:35.125+0000 I CONTROL  

 m31001| 2015-01-09T18:59:35.125+0000 W CONTROL  32-bit servers don't have journaling enabled by default. Please use --journal if you want durability.

 m31001| 2015-01-09T18:59:35.125+0000 I CONTROL  

 m31001| 2015-01-09T18:59:35.154+0000 I CONTROL  [initandlisten] MongoDB starting : pid=4924 port=31001 dbpath=/data/db/testReplSet-1 32-bit host=ip-10-28-60-12

 m31001| 2015-01-09T18:59:35.154+0000 I CONTROL  [initandlisten] ** WARNING: You are running this process as the root user, which is not recommended.

 m31001| 2015-01-09T18:59:35.154+0000 I CONTROL  [initandlisten] 

 m31001| 2015-01-09T18:59:35.155+0000 I CONTROL  [initandlisten] 

 m31001| 2015-01-09T18:59:35.155+0000 I CONTROL  [initandlisten] ** NOTE: This is a 32 bit MongoDB binary.

 m31001| 2015-01-09T18:59:35.155+0000 I CONTROL  [initandlisten] **       32 bit builds are limited to less than 2GB of data (or less with --journal).

 m31001| 2015-01-09T18:59:35.155+0000 I CONTROL  [initandlisten] **       Note that journaling defaults to off for 32 bit and is currently off.

 m31001| 2015-01-09T18:59:35.155+0000 I CONTROL  [initandlisten] **       See http://dochub.mongodb.org/core/32bit

 m31001| 2015-01-09T18:59:35.155+0000 I CONTROL  [initandlisten] 

 m31001| 2015-01-09T18:59:35.155+0000 I CONTROL  [initandlisten] db version v2.8.0-rc5-pre-

 m31001| 2015-01-09T18:59:35.155+0000 I CONTROL  [initandlisten] git version: aee446a97d7c3d7b6129348de6957d8e178864b2

 m31001| 2015-01-09T18:59:35.155+0000 I CONTROL  [initandlisten] build info: Linux build16.nj1.10gen.cc 2.6.32-431.3.1.el6.x86_64 #1 SMP Fri Jan 3 21:39:27 UTC 2014 x86_64 BOOST_LIB_VERSION=1_49

 m31001| 2015-01-09T18:59:35.155+0000 I CONTROL  [initandlisten] allocator: tcmalloc

 m31001| 2015-01-09T18:59:35.155+0000 I CONTROL  [initandlisten] options: { net: { http: { RESTInterfaceEnabled: true, enabled: true }, port: 31001 }, nopreallocj: true, replication: { oplogSizeMB: 40, replSet: "testReplSet" }, security: { keyFile: "jstests/libs/key1" }, setParameter: { enableTestCommands: "1" }, storage: { dbPath: "/data/db/testReplSet-1", mmapv1: { preallocDataFiles: false, smallFiles: true } } }

2015-01-09T18:59:35.214+0000 W NETWORK  Failed to connect to 127.0.0.1:31001, reason: errno:111 Connection refused

 m31001| 2015-01-09T18:59:35.221+0000 I INDEX    [initandlisten] allocating new ns file /data/db/testReplSet-1/local.ns, filling with zeroes...

 m31001| 2015-01-09T18:59:35.224+0000 I NETWORK  [websvr] admin web console waiting for connections on port 32001

 m31001| 2015-01-09T18:59:35.400+0000 I STORAGE  [FileAllocator] allocating new datafile /data/db/testReplSet-1/local.0, filling with zeroes...

 m31001| 2015-01-09T18:59:35.401+0000 I STORAGE  [FileAllocator] creating directory /data/db/testReplSet-1/_tmp

2015-01-09T18:59:35.423+0000 W NETWORK  Failed to connect to 127.0.0.1:31001, reason: errno:111 Connection refused

 m31001| 2015-01-09T18:59:35.444+0000 I STORAGE  [FileAllocator] done allocating datafile /data/db/testReplSet-1/local.0, size: 16MB,  took 0.041 secs

 m31001| 2015-01-09T18:59:35.453+0000 I REPL     [initandlisten] Did not find local replica set configuration document at startup;  NoMatchingDocument Did not find replica set configuration document in local.system.replset

 m31001| 2015-01-09T18:59:35.454+0000 I NETWORK  [initandlisten] waiting for connections on port 31001

[ connection to ip-10-28-60-12:31000, connection to ip-10-28-60-12:31001 ]

ReplSetTest n is : 2

ReplSetTest n: 2 ports: [ 31000, 31001, 31002 ]	31002 number

{

	"useHostName" : true,

	"oplogSize" : 40,

	"keyFile" : "jstests/libs/key1",

	"port" : 31002,

	"noprealloc" : "",

	"smallfiles" : "",

	"rest" : "",

	"replSet" : "testReplSet",

	"dbpath" : "$set-$node",

	"restart" : undefined,

	"pathOpts" : {

		"node" : 2,

		"set" : "testReplSet"

	}

}

ReplSetTest Starting....

Resetting db path '/data/db/testReplSet-2'

2015-01-09T18:59:35.641+0000 I -        shell: started program (sh4942):  /data/mci/shell/src/mongod --oplogSize 40 --keyFile jstests/libs/key1 --port 31002 --noprealloc --smallfiles --rest --replSet testReplSet --dbpath /data/db/testReplSet-2 --nopreallocj --setParameter enableTestCommands=1

 m31001| 2015-01-09T18:59:35.642+0000 I NETWORK  [initandlisten] connection accepted from 127.0.0.1:58496 #1 (1 connection now open)

 m31002| 2015-01-09T18:59:35.654+0000 I CONTROL  ** WARNING: --rest is specified without --httpinterface,

 m31002| 2015-01-09T18:59:35.654+0000 I CONTROL  **          enabling http interface

 m31002| note: noprealloc may hurt performance in many applications

 m31002| 2015-01-09T18:59:35.656+0000 I CONTROL  

 m31002| 2015-01-09T18:59:35.656+0000 W CONTROL  32-bit servers don't have journaling enabled by default. Please use --journal if you want durability.

 m31002| 2015-01-09T18:59:35.656+0000 I CONTROL  

 m31002| 2015-01-09T18:59:35.686+0000 I CONTROL  [initandlisten] MongoDB starting : pid=4942 port=31002 dbpath=/data/db/testReplSet-2 32-bit host=ip-10-28-60-12

 m31002| 2015-01-09T18:59:35.686+0000 I CONTROL  [initandlisten] ** WARNING: You are running this process as the root user, which is not recommended.

 m31002| 2015-01-09T18:59:35.686+0000 I CONTROL  [initandlisten] 

 m31002| 2015-01-09T18:59:35.686+0000 I CONTROL  [initandlisten] 

 m31002| 2015-01-09T18:59:35.686+0000 I CONTROL  [initandlisten] ** NOTE: This is a 32 bit MongoDB binary.

 m31002| 2015-01-09T18:59:35.686+0000 I CONTROL  [initandlisten] **       32 bit builds are limited to less than 2GB of data (or less with --journal).

 m31002| 2015-01-09T18:59:35.686+0000 I CONTROL  [initandlisten] **       Note that journaling defaults to off for 32 bit and is currently off.

 m31002| 2015-01-09T18:59:35.686+0000 I CONTROL  [initandlisten] **       See http://dochub.mongodb.org/core/32bit

 m31002| 2015-01-09T18:59:35.686+0000 I CONTROL  [initandlisten] 

 m31002| 2015-01-09T18:59:35.686+0000 I CONTROL  [initandlisten] db version v2.8.0-rc5-pre-

 m31002| 2015-01-09T18:59:35.686+0000 I CONTROL  [initandlisten] git version: aee446a97d7c3d7b6129348de6957d8e178864b2

 m31002| 2015-01-09T18:59:35.686+0000 I CONTROL  [initandlisten] build info: Linux build16.nj1.10gen.cc 2.6.32-431.3.1.el6.x86_64 #1 SMP Fri Jan 3 21:39:27 UTC 2014 x86_64 BOOST_LIB_VERSION=1_49

 m31002| 2015-01-09T18:59:35.686+0000 I CONTROL  [initandlisten] allocator: tcmalloc

 m31002| 2015-01-09T18:59:35.686+0000 I CONTROL  [initandlisten] options: { net: { http: { RESTInterfaceEnabled: true, enabled: true }, port: 31002 }, nopreallocj: true, replication: { oplogSizeMB: 40, replSet: "testReplSet" }, security: { keyFile: "jstests/libs/key1" }, setParameter: { enableTestCommands: "1" }, storage: { dbPath: "/data/db/testReplSet-2", mmapv1: { preallocDataFiles: false, smallFiles: true } } }

2015-01-09T18:59:35.720+0000 W NETWORK  Failed to connect to 127.0.0.1:31002, reason: errno:111 Connection refused

 m31002| 2015-01-09T18:59:35.747+0000 I INDEX    [initandlisten] allocating new ns file /data/db/testReplSet-2/local.ns, filling with zeroes...

 m31002| 2015-01-09T18:59:35.777+0000 I NETWORK  [websvr] admin web console waiting for connections on port 32002

2015-01-09T18:59:35.925+0000 W NETWORK  Failed to connect to 127.0.0.1:31002, reason: errno:111 Connection refused

 m31002| 2015-01-09T18:59:35.992+0000 I STORAGE  [FileAllocator] allocating new datafile /data/db/testReplSet-2/local.0, filling with zeroes...

 m31002| 2015-01-09T18:59:35.993+0000 I STORAGE  [FileAllocator] creating directory /data/db/testReplSet-2/_tmp

 m31002| 2015-01-09T18:59:36.038+0000 I STORAGE  [FileAllocator] done allocating datafile /data/db/testReplSet-2/local.0, size: 16MB,  took 0.04 secs

 m31002| 2015-01-09T18:59:36.046+0000 I REPL     [initandlisten] Did not find local replica set configuration document at startup;  NoMatchingDocument Did not find replica set configuration document in local.system.replset

 m31002| 2015-01-09T18:59:36.048+0000 I NETWORK  [initandlisten] waiting for connections on port 31002

[

	connection to ip-10-28-60-12:31000,

	connection to ip-10-28-60-12:31001,

	connection to ip-10-28-60-12:31002

]

{

	"replSetInitiate" : {

		"_id" : "testReplSet",

		"members" : [

			{

				"_id" : 0,

				"host" : "ip-10-28-60-12:31000"

			},

			{

				"_id" : 1,

				"host" : "ip-10-28-60-12:31001"

			},

			{

				"_id" : 2,

				"host" : "ip-10-28-60-12:31002"

			}

		]

	}

}

 m31000| 2015-01-09T18:59:36.137+0000 I ACCESS   [conn1] note: no users configured in admin.system.users, allowing localhost access

 m31000| 2015-01-09T18:59:36.138+0000 I REPL     [conn1] replSetInitiate admin command received from client

 m31001| 2015-01-09T18:59:36.142+0000 I NETWORK  [initandlisten] connection accepted from 10.28.60.12:36805 #2 (2 connections now open)

 m31001| 2015-01-09T18:59:36.165+0000 I ACCESS   [conn2] Successfully authenticated as principal __system on local

 m31001| 2015-01-09T18:59:36.168+0000 I NETWORK  [conn2] end connection 10.28.60.12:36805 (1 connection now open)

 m31002| 2015-01-09T18:59:36.169+0000 I NETWORK  [initandlisten] connection accepted from 127.0.0.1:51002 #1 (1 connection now open)

 m31002| 2015-01-09T18:59:36.170+0000 I NETWORK  [initandlisten] connection accepted from 10.28.60.12:55335 #2 (2 connections now open)

 m31002| 2015-01-09T18:59:36.193+0000 I ACCESS   [conn2] Successfully authenticated as principal __system on local

 m31000| 2015-01-09T18:59:36.194+0000 I REPL     [conn1] replSet replSetInitiate config object with 3 members parses ok

 m31001| 2015-01-09T18:59:36.197+0000 I NETWORK  [initandlisten] connection accepted from 10.28.60.12:36807 #3 (2 connections now open)

 m31001| 2015-01-09T18:59:36.222+0000 I ACCESS   [conn3] Successfully authenticated as principal __system on local

 m31000| 2015-01-09T18:59:36.224+0000 I NETWORK  [initandlisten] connection accepted from 10.28.60.12:45465 #2 (2 connections now open)

 m31002| 2015-01-09T18:59:36.270+0000 I NETWORK  [conn2] end connection 10.28.60.12:55335 (1 connection now open)

 m31002| 2015-01-09T18:59:36.271+0000 I NETWORK  [initandlisten] connection accepted from 10.28.60.12:55337 #3 (2 connections now open)

 m31002| 2015-01-09T18:59:36.294+0000 I ACCESS   [conn3] Successfully authenticated as principal __system on local

 m31000| 2015-01-09T18:59:36.297+0000 I REPL     [ReplicationExecutor] new replica set config in use: { _id: "testReplSet", version: 1, members: [ { _id: 0, host: "ip-10-28-60-12:31000", arbiterOnly: false, buildIndexes: true, hidden: false, priority: 1.0, tags: {}, slaveDelay: 0, votes: 1 }, { _id: 1, host: "ip-10-28-60-12:31001", arbiterOnly: false, buildIndexes: true, hidden: false, priority: 1.0, tags: {}, slaveDelay: 0, votes: 1 }, { _id: 2, host: "ip-10-28-60-12:31002", arbiterOnly: false, buildIndexes: true, hidden: false, priority: 1.0, tags: {}, slaveDelay: 0, votes: 1 } ], settings: { chainingAllowed: true, heartbeatTimeoutSecs: 10, getLastErrorModes: {}, getLastErrorDefaults: { w: 1, wtimeout: 0 } } }

 m31000| 2015-01-09T18:59:36.297+0000 I REPL     [ReplicationExecutor] transition to STARTUP2

 m31000| 2015-01-09T18:59:36.300+0000 I REPL     [conn1] ******

 m31000| 2015-01-09T18:59:36.301+0000 I REPL     [conn1] creating replication oplog of size: 40MB...

 m31000| 2015-01-09T18:59:36.302+0000 I STORAGE  [FileAllocator] allocating new datafile /data/db/testReplSet-0/local.1, filling with zeroes...

 m31000| 2015-01-09T18:59:36.511+0000 I REPL     [ReplicationExecutor] Member ip-10-28-60-12:31001 is now in state STARTUP

 m31000| 2015-01-09T18:59:36.513+0000 I NETWORK  [initandlisten] connection accepted from 10.28.60.12:45466 #3 (3 connections now open)

 m31000| 2015-01-09T18:59:36.514+0000 I STORAGE  [FileAllocator] done allocating datafile /data/db/testReplSet-0/local.1, size: 64MB,  took 0.211 secs

 m31000| 2015-01-09T18:59:36.542+0000 I ACCESS   [conn3] Successfully authenticated as principal __system on local

 m31000| 2015-01-09T18:59:36.543+0000 I REPL     [ReplicationExecutor] Member ip-10-28-60-12:31002 is now in state STARTUP

 m31000| 2015-01-09T18:59:36.544+0000 I NETWORK  [initandlisten] connection accepted from 10.28.60.12:45467 #4 (4 connections now open)

 m31000| 2015-01-09T18:59:36.556+0000 I ACCESS   [conn2] Successfully authenticated as principal __system on local

 m31000| 2015-01-09T18:59:36.557+0000 I NETWORK  [initandlisten] connection accepted from 10.28.60.12:45468 #5 (5 connections now open)

 m31000| 2015-01-09T18:59:36.582+0000 I ACCESS   [conn5] Successfully authenticated as principal __system on local

 m31000| 2015-01-09T18:59:36.582+0000 I NETWORK  [conn5] end connection 10.28.60.12:45468 (4 connections now open)

 m31000| 2015-01-09T18:59:36.607+0000 I ACCESS   [conn4] Successfully authenticated as principal __system on local

 m31000| 2015-01-09T18:59:36.608+0000 I NETWORK  [conn4] end connection 10.28.60.12:45467 (3 connections now open)

 m31002| 2015-01-09T18:59:36.609+0000 I NETWORK  [initandlisten] connection accepted from 10.28.60.12:55342 #4 (3 connections now open)

 m31002| 2015-01-09T18:59:36.657+0000 I ACCESS   [conn4] Successfully authenticated as principal __system on local

 m31001| 2015-01-09T18:59:36.658+0000 I REPL     [WriteReplSetConfig] Starting replication applier threads

 m31001| 2015-01-09T18:59:36.659+0000 I REPL     [ReplicationExecutor] new replica set config in use: { _id: "testReplSet", version: 1, members: [ { _id: 0, host: "ip-10-28-60-12:31000", arbiterOnly: false, buildIndexes: true, hidden: false, priority: 1.0, tags: {}, slaveDelay: 0, votes: 1 }, { _id: 1, host: "ip-10-28-60-12:31001", arbiterOnly: false, buildIndexes: true, hidden: false, priority: 1.0, tags: {}, slaveDelay: 0, votes: 1 }, { _id: 2, host: "ip-10-28-60-12:31002", arbiterOnly: false, buildIndexes: true, hidden: false, priority: 1.0, tags: {}, slaveDelay: 0, votes: 1 } ], settings: { chainingAllowed: true, heartbeatTimeoutSecs: 10, getLastErrorModes: {}, getLastErrorDefaults: { w: 1, wtimeout: 0 } } }

 m31001| 2015-01-09T18:59:36.659+0000 I REPL     [ReplicationExecutor] transition to STARTUP2

 m31001| 2015-01-09T18:59:36.659+0000 I REPL     [ReplicationExecutor] Member ip-10-28-60-12:31000 is now in state STARTUP2

 m31001| 2015-01-09T18:59:36.662+0000 I REPL     [rsSync] ******

 m31001| 2015-01-09T18:59:36.662+0000 I REPL     [rsSync] creating replication oplog of size: 40MB...

 m31001| 2015-01-09T18:59:36.666+0000 I STORAGE  [FileAllocator] allocating new datafile /data/db/testReplSet-1/local.1, filling with zeroes...

 m31002| 2015-01-09T18:59:36.857+0000 I NETWORK  [initandlisten] connection accepted from 10.28.60.12:55343 #5 (4 connections now open)

 m31002| 2015-01-09T18:59:36.907+0000 I ACCESS   [conn5] Successfully authenticated as principal __system on local

 m31001| 2015-01-09T18:59:36.909+0000 I REPL     [ReplicationExecutor] Member ip-10-28-60-12:31002 is now in state STARTUP

 m31001| 2015-01-09T18:59:36.910+0000 I NETWORK  [initandlisten] connection accepted from 10.28.60.12:36815 #4 (3 connections now open)

 m31001| 2015-01-09T18:59:36.938+0000 I ACCESS   [conn4] Successfully authenticated as principal __system on local

 m31002| 2015-01-09T18:59:36.940+0000 I NETWORK  [conn4] end connection 10.28.60.12:55342 (3 connections now open)

 m31001| 2015-01-09T18:59:36.941+0000 I NETWORK  [initandlisten] connection accepted from 10.28.60.12:36816 #5 (4 connections now open)

 m31001| 2015-01-09T18:59:36.976+0000 I ACCESS   [conn5] Successfully authenticated as principal __system on local

 m31001| 2015-01-09T18:59:36.977+0000 I NETWORK  [conn5] end connection 10.28.60.12:36816 (3 connections now open)

 m31001| 2015-01-09T18:59:37.034+0000 I STORAGE  [FileAllocator] done allocating datafile /data/db/testReplSet-1/local.1, size: 64MB,  took 0.368 secs

 m31002| 2015-01-09T18:59:37.038+0000 I REPL     [WriteReplSetConfig] Starting replication applier threads

 m31002| 2015-01-09T18:59:37.039+0000 I REPL     [ReplicationExecutor] new replica set config in use: { _id: "testReplSet", version: 1, members: [ { _id: 0, host: "ip-10-28-60-12:31000", arbiterOnly: false, buildIndexes: true, hidden: false, priority: 1.0, tags: {}, slaveDelay: 0, votes: 1 }, { _id: 1, host: "ip-10-28-60-12:31001", arbiterOnly: false, buildIndexes: true, hidden: false, priority: 1.0, tags: {}, slaveDelay: 0, votes: 1 }, { _id: 2, host: "ip-10-28-60-12:31002", arbiterOnly: false, buildIndexes: true, hidden: false, priority: 1.0, tags: {}, slaveDelay: 0, votes: 1 } ], settings: { chainingAllowed: true, heartbeatTimeoutSecs: 10, getLastErrorModes: {}, getLastErrorDefaults: { w: 1, wtimeout: 0 } } }

 m31002| 2015-01-09T18:59:37.039+0000 I REPL     [ReplicationExecutor] transition to STARTUP2

 m31002| 2015-01-09T18:59:37.040+0000 I REPL     [ReplicationExecutor] Member ip-10-28-60-12:31000 is now in state STARTUP2

 m31002| 2015-01-09T18:59:37.040+0000 I REPL     [ReplicationExecutor] Member ip-10-28-60-12:31001 is now in state STARTUP2

 m31002| 2015-01-09T18:59:37.045+0000 I REPL     [rsSync] ******

 m31002| 2015-01-09T18:59:37.045+0000 I REPL     [rsSync] creating replication oplog of size: 40MB...

 m31002| 2015-01-09T18:59:37.046+0000 I STORAGE  [FileAllocator] allocating new datafile /data/db/testReplSet-2/local.1, filling with zeroes...

 m31002| 2015-01-09T18:59:37.605+0000 I STORAGE  [FileAllocator] done allocating datafile /data/db/testReplSet-2/local.1, size: 64MB,  took 0.558 secs

 m31000| 2015-01-09T18:59:38.517+0000 I REPL     [ReplicationExecutor] Member ip-10-28-60-12:31001 is now in state STARTUP2

 m31000| 2015-01-09T18:59:38.549+0000 I REPL     [ReplicationExecutor] Member ip-10-28-60-12:31002 is now in state STARTUP2

 m31001| 2015-01-09T18:59:38.913+0000 I REPL     [ReplicationExecutor] Member ip-10-28-60-12:31002 is now in state STARTUP2

 m31001| 2015-01-09T18:59:40.372+0000 I REPL     [rsSync] ******

 m31001| 2015-01-09T18:59:40.372+0000 I REPL     [rsSync] initial sync pending

 m31001| 2015-01-09T18:59:40.372+0000 I REPL     [rsSync] no valid sync sources found in current replset to do an initial sync

 m31000| 2015-01-09T18:59:40.677+0000 I REPL     [conn1] ******

 m31000| 2015-01-09T18:59:40.677+0000 I REPL     [conn1] Starting replication applier threads

 m31000| 2015-01-09T18:59:40.677+0000 I COMMAND  [conn1] command admin.$cmd command: replSetInitiate { replSetInitiate: { _id: "testReplSet", members: [ { _id: 0.0, host: "ip-10-28-60-12:31000" }, { _id: 1.0, host: "ip-10-28-60-12:31001" }, { _id: 2.0, host: "ip-10-28-60-12:31002" } ] } } keyUpdates:0 writeConflicts:0 numYields:0  reslen:37 4539ms

 m31000| 2015-01-09T18:59:40.680+0000 I REPL     [ReplicationExecutor] transition to RECOVERING

 m31001| 2015-01-09T18:59:40.683+0000 I ACCESS   [conn1] note: no users configured in admin.system.users, allowing localhost access

 m31000| 2015-01-09T18:59:40.684+0000 I REPL     [ReplicationExecutor] transition to SECONDARY

 m31002| 2015-01-09T18:59:41.043+0000 I REPL     [rsSync] ******

 m31002| 2015-01-09T18:59:41.043+0000 I REPL     [rsSync] initial sync pending

 m31002| 2015-01-09T18:59:41.043+0000 I REPL     [rsSync] no valid sync sources found in current replset to do an initial sync

 m31002| 2015-01-09T18:59:41.045+0000 I ACCESS   [conn1] note: no users configured in admin.system.users, allowing localhost access

 m31002| 2015-01-09T18:59:41.046+0000 I REPL     [ReplicationExecutor] Member ip-10-28-60-12:31000 is now in state SECONDARY

 m31001| 2015-01-09T18:59:41.372+0000 I REPL     [rsSync] initial sync pending

 m31001| 2015-01-09T18:59:41.373+0000 I REPL     [rsSync] no valid sync sources found in current replset to do an initial sync

 m31002| 2015-01-09T18:59:42.044+0000 I REPL     [rsSync] initial sync pending

 m31002| 2015-01-09T18:59:42.045+0000 I REPL     [ReplicationExecutor] syncing from: ip-10-28-60-12:31000

 m31000| 2015-01-09T18:59:42.046+0000 I NETWORK  [initandlisten] connection accepted from 10.28.60.12:45473 #6 (4 connections now open)

 m31000| 2015-01-09T18:59:42.097+0000 I ACCESS   [conn6] Successfully authenticated as principal __system on local

 m31002| 2015-01-09T18:59:42.098+0000 I REPL     [rsSync] initial sync drop all databases

 m31002| 2015-01-09T18:59:42.098+0000 I STORAGE  [rsSync] dropAllDatabasesExceptLocal 1

 m31002| 2015-01-09T18:59:42.098+0000 I REPL     [rsSync] initial sync clone all databases

 m31002| 2015-01-09T18:59:42.098+0000 I REPL     [rsSync] initial sync data copy, starting syncup

 m31002| 2015-01-09T18:59:42.098+0000 I REPL     [rsSync] oplog sync 1 of 3

 m31002| 2015-01-09T18:59:42.098+0000 I REPL     [rsSync] oplog sync 2 of 3

 m31002| 2015-01-09T18:59:42.098+0000 I REPL     [rsSync] initial sync building indexes

 m31002| 2015-01-09T18:59:42.099+0000 I REPL     [rsSync] oplog sync 3 of 3

 m31002| 2015-01-09T18:59:42.103+0000 I REPL     [rsSync] initial sync finishing up

 m31002| 2015-01-09T18:59:42.103+0000 I REPL     [rsSync] replSet set minValid=54b0251c:1

 m31002| 2015-01-09T18:59:42.104+0000 I REPL     [rsSync] initial sync done

 m31000| 2015-01-09T18:59:42.105+0000 I NETWORK  [conn6] end connection 10.28.60.12:45473 (3 connections now open)

 m31002| 2015-01-09T18:59:42.106+0000 I REPL     [ReplicationExecutor] transition to RECOVERING

 m31002| 2015-01-09T18:59:42.107+0000 I REPL     [ReplicationExecutor] transition to SECONDARY

 m31002| 2015-01-09T18:59:42.292+0000 I REPL     [ReplicationExecutor] could not find member to sync from

 m31001| 2015-01-09T18:59:42.376+0000 I REPL     [rsSync] initial sync pending

 m31001| 2015-01-09T18:59:42.376+0000 I REPL     [rsSync] no valid sync sources found in current replset to do an initial sync

 m31000| 2015-01-09T18:59:42.525+0000 I REPL     [ReplicationExecutor] Standing for election

 m31000| 2015-01-09T18:59:42.525+0000 I REPL     [ReplicationExecutor] not electing self, ip-10-28-60-12:31001 would veto with 'I don't think ip-10-28-60-12:31000 is electable because the member is not currently a secondary; member is more than 10 seconds behind the most up-to-date member (mask 0xA)'

 m31000| 2015-01-09T18:59:42.525+0000 I REPL     [ReplicationExecutor] not electing self, we are not freshest

 m31000| 2015-01-09T18:59:42.556+0000 I REPL     [ReplicationExecutor] Member ip-10-28-60-12:31002 is now in state SECONDARY

 m31000| 2015-01-09T18:59:42.556+0000 I REPL     [ReplicationExecutor] Standing for election

 m31000| 2015-01-09T18:59:42.557+0000 I REPL     [ReplicationExecutor] not electing self, ip-10-28-60-12:31001 would veto with 'I don't think ip-10-28-60-12:31000 is electable because the member is not currently a secondary; member is more than 10 seconds behind the most up-to-date member (mask 0xA)'

 m31000| 2015-01-09T18:59:42.557+0000 I REPL     [ReplicationExecutor] not electing self, we are not freshest

 m31001| 2015-01-09T18:59:42.677+0000 I REPL     [ReplicationExecutor] Member ip-10-28-60-12:31000 is now in state SECONDARY

 m31001| 2015-01-09T18:59:42.924+0000 I REPL     [ReplicationExecutor] Member ip-10-28-60-12:31002 is now in state SECONDARY

 m31002| 2015-01-09T18:59:43.053+0000 I REPL     [ReplicationExecutor] Standing for election

 m31002| 2015-01-09T18:59:43.053+0000 I REPL     [ReplicationExecutor] replSet possible election tie; sleeping 714ms until 2015-01-09T18:59:43.767+0000

 m31001| 2015-01-09T18:59:43.380+0000 I REPL     [rsSync] initial sync pending

 m31001| 2015-01-09T18:59:43.380+0000 I REPL     [ReplicationExecutor] syncing from: ip-10-28-60-12:31002

 m31002| 2015-01-09T18:59:43.382+0000 I NETWORK  [initandlisten] connection accepted from 10.28.60.12:55348 #6 (4 connections now open)

 m31002| 2015-01-09T18:59:43.430+0000 I ACCESS   [conn6] Successfully authenticated as principal __system on local

 m31001| 2015-01-09T18:59:43.431+0000 I REPL     [rsSync] initial sync drop all databases

 m31001| 2015-01-09T18:59:43.432+0000 I STORAGE  [rsSync] dropAllDatabasesExceptLocal 1

 m31001| 2015-01-09T18:59:43.432+0000 I REPL     [rsSync] initial sync clone all databases

 m31001| 2015-01-09T18:59:43.432+0000 I REPL     [rsSync] initial sync data copy, starting syncup

 m31001| 2015-01-09T18:59:43.432+0000 I REPL     [rsSync] oplog sync 1 of 3

 m31001| 2015-01-09T18:59:43.432+0000 I REPL     [rsSync] oplog sync 2 of 3

 m31001| 2015-01-09T18:59:43.432+0000 I REPL     [rsSync] initial sync building indexes

 m31001| 2015-01-09T18:59:43.432+0000 I REPL     [rsSync] oplog sync 3 of 3

 m31001| 2015-01-09T18:59:43.433+0000 I REPL     [rsSync] initial sync finishing up

 m31001| 2015-01-09T18:59:43.433+0000 I REPL     [rsSync] replSet set minValid=54b0251c:1

 m31001| 2015-01-09T18:59:43.433+0000 I REPL     [rsSync] initial sync done

 m31002| 2015-01-09T18:59:43.438+0000 I NETWORK  [conn6] end connection 10.28.60.12:55348 (3 connections now open)

 m31001| 2015-01-09T18:59:43.439+0000 I REPL     [ReplicationExecutor] transition to RECOVERING

 m31001| 2015-01-09T18:59:43.439+0000 I REPL     [ReplicationExecutor] transition to SECONDARY

 m31001| 2015-01-09T18:59:43.688+0000 I REPL     [ReplicationExecutor] could not find member to sync from

 m31002| 2015-01-09T18:59:43.772+0000 I REPL     [ReplicationExecutor] Standing for election

 m31002| 2015-01-09T18:59:43.773+0000 I REPL     [ReplicationExecutor] replSet info electSelf

 m31002| 2015-01-09T18:59:43.773+0000 I REPL     [ReplicationExecutor] replSet election succeeded, assuming primary role

 m31002| 2015-01-09T18:59:43.773+0000 I REPL     [ReplicationExecutor] transition to PRIMARY

 m31000| 2015-01-09T18:59:43.773+0000 I REPL     [ReplicationExecutor] replSetElect voting yea for ip-10-28-60-12:31002 (2)

 m31001| 2015-01-09T18:59:43.773+0000 I REPL     [ReplicationExecutor] replSetElect voting yea for ip-10-28-60-12:31002 (2)

 m31002| 2015-01-09T18:59:44.108+0000 I REPL     [rsSync] transition to primary complete; database writes are now permitted

 m31002| 2015-01-09T18:59:44.151+0000 I INDEX    [conn1] allocating new ns file /data/db/testReplSet-2/admin.ns, filling with zeroes...

 m31002| 2015-01-09T18:59:44.523+0000 I STORAGE  [FileAllocator] allocating new datafile /data/db/testReplSet-2/admin.0, filling with zeroes...

 m31000| 2015-01-09T18:59:44.533+0000 I REPL     [ReplicationExecutor] Member ip-10-28-60-12:31001 is now in state SECONDARY

 m31000| 2015-01-09T18:59:44.563+0000 I REPL     [ReplicationExecutor] Member ip-10-28-60-12:31002 is now in state PRIMARY

 m31002| 2015-01-09T18:59:44.597+0000 I STORAGE  [FileAllocator] done allocating datafile /data/db/testReplSet-2/admin.0, size: 16MB,  took 0.074 secs

 m31002| 2015-01-09T18:59:44.605+0000 I INDEX    [conn1] build index on: admin.system.users properties: { v: 1, unique: true, key: { user: 1, db: 1 }, name: "user_1_db_1", ns: "admin.system.users" }

 m31002| 2015-01-09T18:59:44.606+0000 I INDEX    [conn1] 	 building index using bulk method

 m31002| 2015-01-09T18:59:44.606+0000 I INDEX    [conn1] build index done.  scanned 0 total records. 0 secs

 m31001| 2015-01-09T18:59:44.928+0000 I REPL     [ReplicationExecutor] Member ip-10-28-60-12:31002 is now in state PRIMARY

 m31002| 2015-01-09T18:59:45.061+0000 I REPL     [ReplicationExecutor] Member ip-10-28-60-12:31001 is now in state SECONDARY

 m31001| 2015-01-09T18:59:45.696+0000 I REPL     [ReplicationExecutor] syncing from: ip-10-28-60-12:31002

 m31002| 2015-01-09T18:59:45.698+0000 I NETWORK  [initandlisten] connection accepted from 10.28.60.12:55351 #7 (4 connections now open)

 m31002| 2015-01-09T18:59:45.747+0000 I ACCESS   [conn7] Successfully authenticated as principal __system on local

 m31002| 2015-01-09T18:59:45.748+0000 I NETWORK  [initandlisten] connection accepted from 10.28.60.12:55352 #8 (5 connections now open)

 m31002| 2015-01-09T18:59:45.772+0000 I ACCESS   [conn8] Successfully authenticated as principal __system on local

 m31001| 2015-01-09T18:59:45.748+0000 I REPL     [SyncSourceFeedback] replset setting syncSourceFeedback to ip-10-28-60-12:31002

 m31001| 2015-01-09T18:59:45.775+0000 I INDEX    [repl writer worker 1] allocating new ns file /data/db/testReplSet-1/admin.ns, filling with zeroes...

 m31001| 2015-01-09T18:59:46.092+0000 I STORAGE  [FileAllocator] allocating new datafile /data/db/testReplSet-1/admin.0, filling with zeroes...

 m31001| 2015-01-09T18:59:46.134+0000 I STORAGE  [FileAllocator] done allocating datafile /data/db/testReplSet-1/admin.0, size: 16MB,  took 0.041 secs

 m31001| 2015-01-09T18:59:46.144+0000 I INDEX    [repl writer worker 1] build index on: admin.system.users properties: { v: 1, unique: true, key: { user: 1, db: 1 }, name: "user_1_db_1", ns: "admin.system.users" }

 m31001| 2015-01-09T18:59:46.144+0000 I INDEX    [repl writer worker 1] 	 building index using bulk method

 m31001| 2015-01-09T18:59:46.144+0000 I INDEX    [repl writer worker 1] build index done.  scanned 0 total records. 0 secs

 m31000| 2015-01-09T18:59:46.708+0000 I REPL     [ReplicationExecutor] syncing from: ip-10-28-60-12:31002

 m31002| 2015-01-09T18:59:46.710+0000 I NETWORK  [initandlisten] connection accepted from 10.28.60.12:55353 #9 (6 connections now open)

 m31002| 2015-01-09T18:59:46.734+0000 I ACCESS   [conn9] Successfully authenticated as principal __system on local

 m31002| 2015-01-09T18:59:46.735+0000 I NETWORK  [initandlisten] connection accepted from 10.28.60.12:55354 #10 (7 connections now open)

 m31002| 2015-01-09T18:59:46.759+0000 I ACCESS   [conn10] Successfully authenticated as principal __system on local

 m31000| 2015-01-09T18:59:46.735+0000 I REPL     [SyncSourceFeedback] replset setting syncSourceFeedback to ip-10-28-60-12:31002

 m31000| 2015-01-09T18:59:46.763+0000 I INDEX    [repl writer worker 1] allocating new ns file /data/db/testReplSet-0/admin.ns, filling with zeroes...

 m31000| 2015-01-09T18:59:47.130+0000 I STORAGE  [FileAllocator] allocating new datafile /data/db/testReplSet-0/admin.0, filling with zeroes...

Successfully added user: { "user" : "admin", "roles" : [ "root" ] }

2015-01-09T18:59:47.209+0000 I NETWORK  starting new replica set monitor for replica set testReplSet with seeds ip-10-28-60-12:31000,ip-10-28-60-12:31001,ip-10-28-60-12:31002

2015-01-09T18:59:47.210+0000 I NETWORK  [ReplicaSetMonitorWatcher] starting

 m31000| 2015-01-09T18:59:47.197+0000 I STORAGE  [FileAllocator] done allocating datafile /data/db/testReplSet-0/admin.0, size: 16MB,  took 0.066 secs

 m31000| 2015-01-09T18:59:47.207+0000 I INDEX    [repl writer worker 1] build index on: admin.system.users properties: { v: 1, unique: true, key: { user: 1, db: 1 }, name: "user_1_db_1", ns: "admin.system.users" }

 m31000| 2015-01-09T18:59:47.207+0000 I INDEX    [repl writer worker 1] 	 building index using bulk method

 m31000| 2015-01-09T18:59:47.207+0000 I INDEX    [repl writer worker 1] build index done.  scanned 0 total records. 0 secs

 m31002| 2015-01-09T18:59:47.208+0000 I COMMAND  [conn1] command admin.$cmd command: getLastError { getLastError: 1, w: 3.0 } ntoreturn:1 keyUpdates:0 writeConflicts:0 numYields:0  reslen:210 2602ms

 m31002| 2015-01-09T18:59:47.208+0000 I COMMAND  [conn1] command admin.$cmd command: createUser { createUser: "admin", pwd: "xxx", roles: [ "root" ], digestPassword: false, writeConcern: { w: 3.0 } } keyUpdates:0 writeConflicts:0 numYields:0  reslen:37 3078ms

 m31002| 2015-01-09T18:59:47.214+0000 I NETWORK  [initandlisten] connection accepted from 10.28.60.12:55356 #11 (8 connections now open)

 m31001| 2015-01-09T18:59:47.212+0000 I NETWORK  [initandlisten] connection accepted from 10.28.60.12:36826 #6 (4 connections now open)

 m31002| 2015-01-09T18:59:47.220+0000 I NETWORK  [initandlisten] connection accepted from 10.28.60.12:55357 #12 (9 connections now open)

 m31002| 2015-01-09T18:59:47.248+0000 I ACCESS   [conn12] Successfully authenticated as principal admin on admin

ReplSetTest n: 0 ports: [ 31000, 31001, 31002 ]	31000 number

ReplSetTest stop *** Shutting down mongod in port 31000 ***

 m31000| 2015-01-09T18:59:47.267+0000 I CONTROL  [signalProcessingThread] got signal 15 (Terminated), will terminate after current cmd ends

 m31000| 2015-01-09T18:59:47.267+0000 I REPL     [signalProcessingThread] Stopping replication applier threads

 m31000| 2015-01-09T18:59:48.692+0000 I STORAGE  [conn2] got request after shutdown()

 m31001| 2015-01-09T18:59:48.692+0000 I NETWORK  [ReplExecNetThread-0] DBClientCursor::init call() failed

 m31001| 2015-01-09T18:59:48.692+0000 I REPL     [ReplicationExecutor] Error in heartbeat request to ip-10-28-60-12:31000; Location10276 DBClientBase::findN: transport error: ip-10-28-60-12:31000 ns: admin.$cmd query: { replSetHeartbeat: "testReplSet", pv: 1, v: 1, from: "ip-10-28-60-12:31001", fromId: 1, checkEmpty: false }

 m31000| 2015-01-09T18:59:49.072+0000 I STORAGE  [conn3] got request after shutdown()

 m31002| 2015-01-09T18:59:49.072+0000 I NETWORK  [ReplExecNetThread-2] DBClientCursor::init call() failed

 m31002| 2015-01-09T18:59:49.072+0000 I REPL     [ReplicationExecutor] Error in heartbeat request to ip-10-28-60-12:31000; Location10276 DBClientBase::findN: transport error: ip-10-28-60-12:31000 ns: admin.$cmd query: { replSetHeartbeat: "testReplSet", pv: 1, v: 1, from: "ip-10-28-60-12:31002", fromId: 2, checkEmpty: false }

 m31000| 2015-01-09T18:59:52.303+0000 I CONTROL  [signalProcessingThread] now exiting

 m31000| 2015-01-09T18:59:52.303+0000 I NETWORK  [signalProcessingThread] shutdown: going to close listening sockets...

 m31000| 2015-01-09T18:59:52.303+0000 I NETWORK  [signalProcessingThread] closing listening socket: 11

 m31000| 2015-01-09T18:59:52.304+0000 I NETWORK  [signalProcessingThread] closing listening socket: 12

 m31000| 2015-01-09T18:59:52.304+0000 I NETWORK  [signalProcessingThread] closing listening socket: 15

 m31000| 2015-01-09T18:59:52.304+0000 I NETWORK  [signalProcessingThread] removing socket file: /tmp/mongodb-31000.sock

 m31000| 2015-01-09T18:59:52.304+0000 I NETWORK  [signalProcessingThread] shutdown: going to flush diaglog...

 m31000| 2015-01-09T18:59:52.304+0000 I NETWORK  [signalProcessingThread] shutdown: going to close sockets...

 m31000| 2015-01-09T18:59:52.304+0000 I STORAGE  [signalProcessingThread] shutdown: waiting for fs preallocator...

 m31000| 2015-01-09T18:59:52.304+0000 I STORAGE  [signalProcessingThread] shutdown: closing all files...

 m31002| 2015-01-09T18:59:52.304+0000 I NETWORK  [ReplExecNetThread-2] Socket recv() errno:104 Connection reset by peer 10.28.60.12:31000

 m31002| 2015-01-09T18:59:52.304+0000 I NETWORK  [ReplExecNetThread-2] SocketException: remote: 10.28.60.12:31000 error: 9001 socket exception [RECV_ERROR] server [10.28.60.12:31000] 

 m31002| 2015-01-09T18:59:52.304+0000 I NETWORK  [ReplExecNetThread-2] DBClientCursor::init call() failed

 m31002| 2015-01-09T18:59:52.304+0000 I REPL     [ReplicationExecutor] Error in heartbeat request to ip-10-28-60-12:31000; Location10276 DBClientBase::findN: transport error: ip-10-28-60-12:31000 ns: local.$cmd query: { saslStart: 1, mechanism: "SCRAM-SHA-1", payload: BinData(0, 6E2C2C6E3D5F5F73797374656D2C723D3343735557307531485339585735646D6167542B72576B55326A35394F67306B) }

 m31000| 2015-01-09T18:59:52.351+0000 I STORAGE  [signalProcessingThread] closeAllFiles() finished

 m31000| 2015-01-09T18:59:52.351+0000 I STORAGE  [signalProcessingThread] shutdown: removing fs lock...

 m31002| 2015-01-09T18:59:52.353+0000 W NETWORK  [ReplExecNetThread-1] Failed to connect to 10.28.60.12:31000, reason: errno:111 Connection refused

 m31002| 2015-01-09T18:59:52.353+0000 I REPL     [ReplicationExecutor] Error in heartbeat request to ip-10-28-60-12:31000; Location18915 Failed attempt to connect to ip-10-28-60-12:31000; couldn't connect to server ip-10-28-60-12:31000 (10.28.60.12), connection attempt failed

 m31001| 2015-01-09T18:59:52.355+0000 I NETWORK  [conn3] end connection 10.28.60.12:36807 (3 connections now open)

 m31002| 2015-01-09T18:59:52.356+0000 I NETWORK  [conn3] end connection 10.28.60.12:55337 (8 connections now open)

 m31002| 2015-01-09T18:59:52.357+0000 I NETWORK  [conn9] end connection 10.28.60.12:55353 (7 connections now open)

 m31002| 2015-01-09T18:59:52.358+0000 I NETWORK  [conn10] end connection 10.28.60.12:55354 (6 connections now open)

 m31000| 2015-01-09T18:59:52.359+0000 I CONTROL  [signalProcessingThread] dbexit:  rc: 0

 m31001| 2015-01-09T18:59:52.359+0000 I NETWORK  [ReplExecNetThread-1] Socket recv() errno:104 Connection reset by peer 10.28.60.12:31000

 m31001| 2015-01-09T18:59:52.360+0000 I NETWORK  [ReplExecNetThread-1] SocketException: remote: 10.28.60.12:31000 error: 9001 socket exception [RECV_ERROR] server [10.28.60.12:31000] 

 m31001| 2015-01-09T18:59:52.361+0000 I NETWORK  [ReplExecNetThread-1] DBClientCursor::init call() failed

 m31001| 2015-01-09T18:59:52.362+0000 I REPL     [ReplicationExecutor] Error in heartbeat request to ip-10-28-60-12:31000; Location10276 DBClientBase::findN: transport error: ip-10-28-60-12:31000 ns: local.$cmd query: { saslStart: 1, mechanism: "SCRAM-SHA-1", payload: BinData(0, 6E2C2C6E3D5F5F73797374656D2C723D695A474533346F746F4A7279725567695A7A78445976506F3062495355374B54) }

 m31001| 2015-01-09T18:59:52.365+0000 W NETWORK  [ReplExecNetThread-0] Failed to connect to 10.28.60.12:31000, reason: errno:111 Connection refused

 m31001| 2015-01-09T18:59:52.365+0000 I REPL     [ReplicationExecutor] Error in heartbeat request to ip-10-28-60-12:31000; Location18915 Failed attempt to connect to ip-10-28-60-12:31000; couldn't connect to server ip-10-28-60-12:31000 (10.28.60.12), connection attempt failed

 m31002| 2015-01-09T18:59:54.360+0000 W NETWORK  [ReplExecNetThread-2] Failed to connect to 10.28.60.12:31000, reason: errno:111 Connection refused

 m31002| 2015-01-09T18:59:54.360+0000 I REPL     [ReplicationExecutor] Error in heartbeat request to ip-10-28-60-12:31000; Location18915 Failed attempt to connect to ip-10-28-60-12:31000; couldn't connect to server ip-10-28-60-12:31000 (10.28.60.12), connection attempt failed

 m31002| 2015-01-09T18:59:54.362+0000 W NETWORK  [ReplExecNetThread-1] Failed to connect to 10.28.60.12:31000, reason: errno:111 Connection refused

 m31002| 2015-01-09T18:59:54.362+0000 I REPL     [ReplicationExecutor] Error in heartbeat request to ip-10-28-60-12:31000; Location18915 Failed attempt to connect to ip-10-28-60-12:31000; couldn't connect to server ip-10-28-60-12:31000 (10.28.60.12), connection attempt failed

 m31002| 2015-01-09T18:59:54.365+0000 W NETWORK  [ReplExecNetThread-1] Failed to connect to 10.28.60.12:31000, reason: errno:111 Connection refused

 m31002| 2015-01-09T18:59:54.366+0000 I REPL     [ReplicationExecutor] Error in heartbeat request to ip-10-28-60-12:31000; Location18915 Failed attempt to connect to ip-10-28-60-12:31000; couldn't connect to server ip-10-28-60-12:31000 (10.28.60.12), connection attempt failed

 m31001| 2015-01-09T18:59:54.371+0000 W NETWORK  [ReplExecNetThread-0] Failed to connect to 10.28.60.12:31000, reason: errno:111 Connection refused

 m31001| 2015-01-09T18:59:54.372+0000 I REPL     [ReplicationExecutor] Error in heartbeat request to ip-10-28-60-12:31000; Location18915 Failed attempt to connect to ip-10-28-60-12:31000; couldn't connect to server ip-10-28-60-12:31000 (10.28.60.12), connection attempt failed

 m31001| 2015-01-09T18:59:54.372+0000 W NETWORK  [ReplExecNetThread-1] Failed to connect to 10.28.60.12:31000, reason: errno:111 Connection refused

 m31001| 2015-01-09T18:59:54.372+0000 I REPL     [ReplicationExecutor] Error in heartbeat request to ip-10-28-60-12:31000; Location18915 Failed attempt to connect to ip-10-28-60-12:31000; couldn't connect to server ip-10-28-60-12:31000 (10.28.60.12), connection attempt failed

 m31001| 2015-01-09T18:59:54.373+0000 W NETWORK  [ReplExecNetThread-0] Failed to connect to 10.28.60.12:31000, reason: errno:111 Connection refused

 m31001| 2015-01-09T18:59:54.373+0000 I REPL     [ReplicationExecutor] Error in heartbeat request to ip-10-28-60-12:31000; Location18915 Failed attempt to connect to ip-10-28-60-12:31000; couldn't connect to server ip-10-28-60-12:31000 (10.28.60.12), connection attempt failed

 m31002| 2015-01-09T18:59:56.371+0000 W NETWORK  [ReplExecNetThread-0] Failed to connect to 10.28.60.12:31000, reason: errno:111 Connection refused

 m31002| 2015-01-09T18:59:56.371+0000 I REPL     [ReplicationExecutor] Error in heartbeat request to ip-10-28-60-12:31000; Location18915 Failed attempt to connect to ip-10-28-60-12:31000; couldn't connect to server ip-10-28-60-12:31000 (10.28.60.12), connection attempt failed

 m31002| 2015-01-09T18:59:56.375+0000 W NETWORK  [ReplExecNetThread-0] Failed to connect to 10.28.60.12:31000, reason: errno:111 Connection refused

 m31002| 2015-01-09T18:59:56.376+0000 I REPL     [ReplicationExecutor] Error in heartbeat request to ip-10-28-60-12:31000; Location18915 Failed attempt to connect to ip-10-28-60-12:31000; couldn't connect to server ip-10-28-60-12:31000 (10.28.60.12), connection attempt failed

 m31002| 2015-01-09T18:59:56.377+0000 W NETWORK  [ReplExecNetThread-2] Failed to connect to 10.28.60.12:31000, reason: errno:111 Connection refused

 m31002| 2015-01-09T18:59:56.377+0000 I REPL     [ReplicationExecutor] Error in heartbeat request to ip-10-28-60-12:31000; Location18915 Failed attempt to connect to ip-10-28-60-12:31000; couldn't connect to server ip-10-28-60-12:31000 (10.28.60.12), connection attempt failed

 m31001| 2015-01-09T18:59:56.379+0000 W NETWORK  [ReplExecNetThread-0] Failed to connect to 10.28.60.12:31000, reason: errno:111 Connection refused

 m31001| 2015-01-09T18:59:56.379+0000 I REPL     [ReplicationExecutor] Error in heartbeat request to ip-10-28-60-12:31000; Location18915 Failed attempt to connect to ip-10-28-60-12:31000; couldn't connect to server ip-10-28-60-12:31000 (10.28.60.12), connection attempt failed

 m31001| 2015-01-09T18:59:56.380+0000 W NETWORK  [ReplExecNetThread-1] Failed to connect to 10.28.60.12:31000, reason: errno:111 Connection refused

 m31001| 2015-01-09T18:59:56.380+0000 I REPL     [ReplicationExecutor] Error in heartbeat request to ip-10-28-60-12:31000; Location18915 Failed attempt to connect to ip-10-28-60-12:31000; couldn't connect to server ip-10-28-60-12:31000 (10.28.60.12), connection attempt failed

 m31001| 2015-01-09T18:59:56.380+0000 W NETWORK  [ReplExecNetThread-0] Failed to connect to 10.28.60.12:31000, reason: errno:111 Connection refused

 m31001| 2015-01-09T18:59:56.380+0000 I REPL     [ReplicationExecutor] Error in heartbeat request to ip-10-28-60-12:31000; Location18915 Failed attempt to connect to ip-10-28-60-12:31000; couldn't connect to server ip-10-28-60-12:31000 (10.28.60.12), connection attempt failed

2015-01-09T18:59:57.207+0000 W NETWORK  [ReplicaSetMonitorWatcher] Failed to connect to 10.28.60.12:31000, reason: errno:111 Connection refused

2015-01-09T18:59:57.290+0000 I -        shell: stopped mongo program on port 31000

ReplSetTest stop *** Mongod in port 31000 shutdown with code (0) ***

ReplSetTest n: 1 ports: [ 31000, 31001, 31002 ]	31001 number

ReplSetTest stop *** Shutting down mongod in port 31001 ***

 m31001| 2015-01-09T18:59:57.292+0000 I CONTROL  [signalProcessingThread] got signal 15 (Terminated), will terminate after current cmd ends

 m31001| 2015-01-09T18:59:57.292+0000 I REPL     [signalProcessingThread] Stopping replication applier threads

 m31001| 2015-01-09T18:59:57.387+0000 I CONTROL  [signalProcessingThread] now exiting

 m31001| 2015-01-09T18:59:57.387+0000 I NETWORK  [signalProcessingThread] shutdown: going to close listening sockets...

 m31001| 2015-01-09T18:59:57.387+0000 I NETWORK  [signalProcessingThread] closing listening socket: 15

 m31001| 2015-01-09T18:59:57.387+0000 I NETWORK  [signalProcessingThread] closing listening socket: 16

 m31001| 2015-01-09T18:59:57.387+0000 I NETWORK  [signalProcessingThread] closing listening socket: 18

 m31001| 2015-01-09T18:59:57.387+0000 I NETWORK  [signalProcessingThread] removing socket file: /tmp/mongodb-31001.sock

 m31001| 2015-01-09T18:59:57.387+0000 I NETWORK  [signalProcessingThread] shutdown: going to flush diaglog...

 m31001| 2015-01-09T18:59:57.387+0000 I NETWORK  [signalProcessingThread] shutdown: going to close sockets...

 m31001| 2015-01-09T18:59:57.387+0000 I STORAGE  [signalProcessingThread] shutdown: waiting for fs preallocator...

 m31001| 2015-01-09T18:59:57.387+0000 I STORAGE  [signalProcessingThread] shutdown: closing all files...

 m31001| 2015-01-09T18:59:57.429+0000 I STORAGE  [signalProcessingThread] closeAllFiles() finished

 m31001| 2015-01-09T18:59:57.429+0000 I STORAGE  [signalProcessingThread] shutdown: removing fs lock...

 m31001| 2015-01-09T18:59:57.431+0000 I NETWORK  [conn4] end connection 10.28.60.12:36815 (2 connections now open)

 m31001| 2015-01-09T18:59:57.432+0000 I NETWORK  [conn1] end connection 127.0.0.1:58496 (2 connections now open)

 m31002| 2015-01-09T18:59:57.432+0000 I NETWORK  [conn5] end connection 10.28.60.12:55343 (5 connections now open)

 m31001| 2015-01-09T18:59:57.433+0000 I NETWORK  [conn6] end connection 10.28.60.12:36826 (2 connections now open)

 m31002| 2015-01-09T18:59:57.434+0000 I NETWORK  [conn8] end connection 10.28.60.12:55352 (4 connections now open)

 m31002| 2015-01-09T18:59:57.435+0000 I NETWORK  [conn7] end connection 10.28.60.12:55351 (3 connections now open)

 m31001| 2015-01-09T18:59:57.436+0000 I CONTROL  [signalProcessingThread] dbexit:  rc: 0

2015-01-09T18:59:58.294+0000 I -        shell: stopped mongo program on port 31001

ReplSetTest stop *** Mongod in port 31001 shutdown with code (0) ***

2015-01-09T18:59:58.296+0000 I NETWORK  DBClientCursor::init call() failed

ReplSetTest Could not call ismaster on node 0: Error: error doing query: failed

2015-01-09T18:59:58.297+0000 I NETWORK  DBClientCursor::init call() failed

ReplSetTest Could not call ismaster on node 1: Error: error doing query: failed

assert: did not throw exception: undefined

Error: did not throw exception: undefined

    at Error (<anonymous>)

    at doassert (src/mongo/shell/assert.js:11:14)

    at Function.assert.throws (src/mongo/shell/assert.js:224:5)

    at /data/mci/shell/src/jstests/replsets/auth_no_pri.js:20:8

    at /data/mci/shell/src/jstests/replsets/auth_no_pri.js:29:2

2015-01-09T18:59:58.302+0000 I QUERY    Error: did not throw exception: undefined

    at Error (<anonymous>)

    at doassert (src/mongo/shell/assert.js:11:14)

    at Function.assert.throws (src/mongo/shell/assert.js:224:5)

    at /data/mci/shell/src/jstests/replsets/auth_no_pri.js:20:8

    at /data/mci/shell/src/jstests/replsets/auth_no_pri.js:29:2 at src/mongo/shell/assert.js:13

failed to load: /data/mci/shell/src/jstests/replsets/auth_no_pri.js

 m31002| 2015-01-09T18:59:58.304+0000 I CONTROL  [signalProcessingThread] got signal 15 (Terminated), will terminate after current cmd ends

 m31002| 2015-01-09T18:59:58.305+0000 I REPL     [signalProcessingThread] Stopping replication applier threads

 m31002| 2015-01-09T18:59:59.215+0000 I CONTROL  [signalProcessingThread] now exiting

 m31002| 2015-01-09T18:59:59.215+0000 I NETWORK  [signalProcessingThread] shutdown: going to close listening sockets...

 m31002| 2015-01-09T18:59:59.215+0000 I NETWORK  [signalProcessingThread] closing listening socket: 18

 m31002| 2015-01-09T18:59:59.215+0000 I NETWORK  [signalProcessingThread] closing listening socket: 19

 m31002| 2015-01-09T18:59:59.215+0000 I NETWORK  [signalProcessingThread] closing listening socket: 22

 m31002| 2015-01-09T18:59:59.215+0000 I NETWORK  [signalProcessingThread] removing socket file: /tmp/mongodb-31002.sock

 m31002| 2015-01-09T18:59:59.215+0000 I NETWORK  [signalProcessingThread] shutdown: going to flush diaglog...

 m31002| 2015-01-09T18:59:59.215+0000 I NETWORK  [signalProcessingThread] shutdown: going to close sockets...

 m31002| 2015-01-09T18:59:59.215+0000 I STORAGE  [signalProcessingThread] shutdown: waiting for fs preallocator...

 m31002| 2015-01-09T18:59:59.215+0000 I STORAGE  [signalProcessingThread] shutdown: closing all files...

 m31002| 2015-01-09T18:59:59.228+0000 I STORAGE  [signalProcessingThread] closeAllFiles() finished

 m31002| 2015-01-09T18:59:59.229+0000 I STORAGE  [signalProcessingThread] shutdown: removing fs lock...

 m31002| 2015-01-09T18:59:59.229+0000 I CONTROL  [signalProcessingThread] dbexit:  rc: 0