[SERVER-15971] mongod --help output should look better Created: 05/Nov/14  Updated: 19/Nov/14  Resolved: 05/Nov/14

Status: Closed
Project: Core Server
Component/s: Storage, Usability
Affects Version/s: 2.8.0-rc0
Fix Version/s: 2.8.0-rc0

Type: Bug Priority: Trivial - P5
Reporter: Kaloian Manassiev Assignee: Matt Kangas
Resolution: Done Votes: 0
Labels: None
Remaining Estimate: Not Specified
Time Spent: Not Specified
Original Estimate: Not Specified

Backwards Compatibility: Fully Compatible
Operating System: ALL
Steps To Reproduce:

Run mongod.exe --help

Participants:

 Description   

storage.wiredtiger.databaseConfig : 
storage.wiredtiger.collectionConfig : 
storage.wiredtiger.indexConfig : 
Options:
 
WiredTiger options:
  --wiredTigerDatabaseConfig arg   WiredTiger database configuration settings
  --wiredTigerCollectionConfig arg WiredTiger collection configuration settings
  --wiredTigerIndexConfig arg      WiredTiger index configuration settings
 
General options:
  -h [ --help ]               show this usage information
  --version                   show version information
  -f [ --config ] arg         configuration file specifying additional options
  -v [ --verbose ] [=arg(=v)] be more verbose (include multiple times for more 
                              verbosity e.g. -vvvvv)
  --quiet                     quieter output
  --port arg                  specify port number - 27017 by default
  --bind_ip arg               comma separated list of ip addresses to listen on
                              - all local ips by default
  --ipv6                      enable IPv6 support (disabled by default)
  --maxConns arg              max number of simultaneous connections - 1000000 
                              by default
  --logpath arg               log file to send write to instead of stdout - has
                              to be a file, not directory
  --logappend                 append to logpath instead of over-writing
  --logRotate arg             set the log rotation behavior (rename|reopen)
  --timeStampFormat arg       Desired format for timestamps in log messages. 
                              One of ctime, iso8601-utc or iso8601-local
  --pidfilepath arg           full path to pidfile (if not set, no pidfile is 
                              created)
  --keyFile arg               private key for cluster authentication
  --setParameter arg          Set a configurable parameter
  --httpinterface             enable http interface
  --clusterAuthMode arg       Authentication mode used for cluster 
                              authentication. Alternatives are 
                              (keyFile|sendKeyFile|sendX509|x509)
  --auth                      run with security
  --noauth                    run without security
  --jsonp                     allow JSONP access via http (has security 
                              implications)
  --rest                      turn on simple rest api
  --slowms arg (=100)         value of slow for profile and console log
  --profile arg               0=off 1=slow, 2=all
  --cpu                       periodically show cpu and iowait utilization
  --sysinfo                   print some diagnostic system information
  --noIndexBuildRetry         don't retry any index builds that were 
                              interrupted by shutdown
  --noscripting               disable scripting engine
  --notablescan               do not allow table scans
 
Windows Service Control Manager options:
  --install                install Windows service
  --remove                 remove Windows service
  --reinstall              reinstall Windows service (equivalent to --remove 
                           followed by --install)
  --serviceName arg        Windows service name
  --serviceDisplayName arg Windows service display name
  --serviceDescription arg Windows service description
  --serviceUser arg        account for service execution
  --servicePassword arg    password used to authenticate serviceUser
 
Replication options:
  --oplogSize arg       size to use (in MB) for replication op log. default is 
                        5% of disk space (i.e. large is good)
 
Master/slave options (old; use replica sets instead):
  --master              master mode
  --slave               slave mode
  --source arg          when slave: specify master as <server:port>
  --only arg            when slave: specify a single database to replicate
  --slavedelay arg      specify delay (in seconds) to be used when applying 
                        master ops to slave
  --autoresync          automatically resync if slave data is stale
 
Replica set options:
  --replSet arg           arg is <setname>[/<optionalseedhostlist>]
  --replIndexPrefetch arg specify index prefetching behavior (if secondary) 
                          [none|_id_only|all]
 
Sharding options:
  --configsvr           declare this is a config db of a cluster; default port 
                        27019; default dir /data/configdb
  --shardsvr            declare this is a shard db of a cluster; default port 
                        27018
 
SSL options:
  --sslOnNormalPorts                    use ssl on configured ports
  --sslMode arg                         set the SSL operation mode 
                                        (disabled|allowSSL|preferSSL|requireSSL
                                        )
  --sslPEMKeyFile arg                   PEM file for ssl
  --sslPEMKeyPassword arg               PEM file password
  --sslClusterFile arg                  Key file for internal SSL 
                                        authentication
  --sslClusterPassword arg              Internal authentication key file 
                                        password
  --sslCAFile arg                       Certificate Authority file for SSL
  --sslCRLFile arg                      Certificate Revocation List file for 
                                        SSL
  --sslWeakCertificateValidation        allow client to connect without 
                                        presenting a certificate
  --sslAllowConnectionsWithoutCertificates 
                                        allow client to connect without 
                                        presenting a certificate
  --sslAllowInvalidHostnames            Allow server certificates to provide 
                                        non-matching hostnames
  --sslAllowInvalidCertificates         allow connections to servers with 
                                        invalid certificates
  --sslFIPSMode                         activate FIPS 140-2 mode at startup
 
Storage options:
  --storageEngine arg (=mmapv1) what storage engine to use
  --dbpath arg                  directory for datafiles - defaults to \data\db\
                                which is E:\data\db\ based on the current 
                                working drive
  --directoryperdb              each database will be stored in a separate 
                                directory
  --noprealloc                  disable data file preallocation - will often 
                                hurt performance
  --nssize arg (=16)            .ns file size (in MB) for new databases
  --quota                       limits each database to a certain number of 
                                files (8 default)
  --quotaFiles arg              number of files allowed per db, implies --quota
  --smallfiles                  use a smaller default file size
  --syncdelay arg (=60)         seconds between disk syncs (0=never, but not 
                                recommended)
  --upgrade                     upgrade db if needed
  --repair                      run repair on all dbs
  --repairpath arg              root directory for repair files - defaults to 
                                dbpath
  --journal                     enable journaling
  --nojournal                   disable journaling (journaling is on by default
                                for 64 bit)
  --journalOptions arg          journal diagnostic options
  --journalCommitInterval arg   how often to group/batch commit (ms)
 
SNMP Module Options:
  --snmp-subagent       run snmp subagent
  --snmp-master         run snmp as master
 
Auditing Options:
  --auditFormat arg      Format of the audit log, if logging to a file.  
                         (BSON/JSON)
  --auditDestination arg Destination of audit log output.  
                         (console/syslog/file)
  --auditPath arg        full filespec for audit log file
  --auditFilter arg      filter spec to screen audit records



 Comments   
Comment by Githook User [ 05/Nov/14 ]

Author:

{u'username': u'kangas', u'name': u'Matt Kangas', u'email': u'matt.kangas@mongodb.com'}

Message: SERVER-15971 wiredtiger options should not precede general options
Branch: master
https://github.com/mongodb/mongo/commit/10c497c51f5738c1ebe42903f8d6bfd0f018240a

Comment by Githook User [ 05/Nov/14 ]

Author:

{u'username': u'kangas', u'name': u'Matt Kangas', u'email': u'matt.kangas@mongodb.com'}

Message: SERVER-15971 fix mongod --help format when wiredtiger enabled
Branch: master
https://github.com/mongodb/mongo/commit/c1374695b9fef835b40b16461be659feb8d9b604

Generated at Thu Feb 08 03:39:33 UTC 2024 using Jira 9.7.1#970001-sha1:2222b88b221c4928ef0de3161136cc90c8356a66.